Woodpecker Uds-N2 Piezo Ultrasonic Scaler

The Woodpecker UDS-N2 operates on a power input of 220-240V~ 50Hz/60Hz with 150mA when used with a transformer, or 24V~ 50Hz/60Hz drawing 1.3A without a transformer. This versatile voltage input allows for global compatibility, making it a reliable choice for dental practitioners worldwide.

With a primary tip vibration excursion of less than 100pm and an output half-excursion force below 2N, the UDS-N2 ensures precise and gentle cleaning procedures. The device’s tip vibration frequency of 28kHz+3kHz is optimized to efficiently remove dental plaque, calculus, and stains, providing patients with a comfortable and thorough cleaning experience. The UDS-N2 offers a wide range of power output options, ranging from 3W to 20W, granting dental professionals the flexibility to adjust the intensity of the treatment according to individual patient needs.

Equipped with a water spray function, the UDS-N2 effectively cools the treatment area during scaling procedures, minimizing patient discomfort. This water spray feature also aids in flushing away debris and bacteria, promoting a hygienic and comprehensive cleaning process. The device’s ergonomic design and lightweight construction, with a main unit weight of only 0.2kg, ensure ease of use and maneuverability during extended treatment sessions.

The Woodpecker UDS-N2 Piezo Ultrasonic Scaler comes with a selection of non-led tips, further enhancing its versatility and practicality for various dental applications. These tips are designed to deliver consistent performance, longevity, and exceptional cleaning results, making the UDS-N2 an indispensable tool in any dental practice. In terms of environmental conditions, the UDS-N2 operates within the range of +5°C to +40°C ambient temperature, with a relative humidity of 30% to 75%. It can withstand atmospheric pressure between 70kPa to 106kPa and requires water with an inlet temperature not exceeding +25°C.

Features :

Water spray function for cooling and debris removal
Lightweight (0.2kg) and ergonomic design
Continuous operation mode
Class II protection against electric shock

Specification :

Power input: With transformer – 220-240V~ 50Hz/60Hz 150mA, Without transformer – 24V~ 50Hz/60Hz 1.3A
Output primary tip Vibration excursion: <100pm
Output half-excursion force: <2N
Output tip Vibration frequency: 28kHz+3kHz
Output power: 3W to 20W
Water pressure: 0.01MPa to 0.5MPa
Weight of the main unit: 0.2kg
Operating mode: Continuous operation
Type of protection against electric shock: Class II

The working conditions for the equipment are as follows:

Environment temperature: +5°C to +40°C
Relative humidity: 30% ~ 75%
Atmospheric pressure: 70kPa to 106kPa
Water inlet temperature: not higher than +25°C

Direction to Uses :

Preparation:

Ensure the device is connected to the appropriate power supply: 220-240V~ 50Hz/60Hz with 150mA using a transformer, or 24V~ 50Hz/60Hz drawing 1.3A without a transformer.
Attach the desired non-led tip securely to the handpiece.
Connect the water supply to the device, ensuring the water inlet temperature is not higher than +25°C.

Environmental Conditions:

Before use, check the operating environment temperature, which should be within the range of +5°C to +40°C.
Ensure the relative humidity falls between 30% to 75%.
Confirm the atmospheric pressure is between 70kPa to 106kPa.

Safety Precautions:

As this device is classified as Class II protection against electric shock, ensure that all safety guidelines are followed to prevent any electrical hazards.
Only qualified dental professionals should operate the device.
Prior to use, inspect the handpiece and cables for any damage or wear. Do not use if any issues are found.

Treatment Procedure:

Gently place the non-led tip on the tooth surface to be treated. Avoid exerting excessive pressure to prevent patient discomfort.
Power on the device and set the desired power output level, typically ranging from 3W to 20W, according to the specific treatment requirements.
The device will produce ultrasonic vibrations at a frequency of 28kHz+3kHz to effectively remove dental plaque, calculus, and stains.
Utilize the water spray function to cool the treatment area, reduce discomfort, and flush away debris and bacteria for a hygienic cleaning process.
Operate the UDS-N2 in continuous mode during the treatment for seamless and uninterrupted scaling.

Post-Treatment Care:

After the procedure, power off the device and disconnect it from the power supply.
Thoroughly clean and sterilize the handpiece and non-led tips according to the manufacturer’s instructions to maintain optimal hygiene standards.
Store the device and accessories in a clean and dry environment, ensuring they are protected from physical damage.

Maintenance and Cleaning:

Regularly inspect the device for any signs of wear or malfunction. If any issues are found, seek professional maintenance or repair services.
Clean the external surfaces of the device with a soft, damp cloth to remove any dirt or residue.
Avoid using harsh chemicals or abrasive materials during cleaning, as they may damage the device.