Dentsply X-Smart Plus Endodontic EndoMotor

Endodontic Motor

Dentsply X-Smart Plus Endodontic Endo Motor is the endodontic motor of choice for general dental practitioners performing root canal treatments with the reciprocating, single File technique or traditional continuous rotation File systems. It enables the practitioner to fully focus on the patient and the treatment due to its simplicity of use, as well as the excellent visibility and access with the miniature contra-angle attachment.

The X-Smart Plus micromotor is a simple and easy to use unit designed for GDPs carrying out rotary endodontics. It has a lightweight handpiece with a small head. The unit is compact and portable, operated without a foot pedal and can be battery operated. It has reciprocation for WaveOne and torque control and auto-reverse modes for continuous rotation instruments. X-Smart Plus is the endo motor of choice for General Dental Practitioners performing root canal treatments with the reciprocating, single file technique or traditional continuous rotation file systems. It enables the practitioner to fully focus on the patient and the treatment due to its simplicity of use, as well as the excellent visibility and access with the miniature contra-angle attachment.

Features : 

This generation of the X-Smart endo motor is everything you like about the X-Smart with a plus:

No foot pedal

On / Off button on the motor handpiece
Excellent visibility & access

Due to the miniature contra-angle head
Simple & improved user interface

Large bright colour screen
Dedicated button controls
“Click and go” navigation
New design with optimised screen & keyboard ergonomics
Single file root canal shaping:

Reciprocating motion – discover the WAVEONE RECIPROCATING FILE SYSTEM
File selection at a single glance:

ISO colour coded file library
Pre-programmed settings for WaveOne, Protaper® Universal, PROTAPER NEXT™ Pathfile™, Gates and reciproc™
7 free programs for individual settings
The X-Smart Plus is operated by a rechargeable battery and provides in continuous rotation, a speed range between 250 and 1,200 rpm and a torque range between 0.6 and 4.0Ncm. A warning sound helps you keep track of the file stress and the auto reverse rotation at the torque limit reduces the risk of file breakage.

Specification : 

Miniature contra-angle head that can be adjusted in 6 positions
On /Off button on the motor handpiece
Reciprocating motion and continuous rotation
Includes a file library with preset programs for wave one®, , PROTAPER® UNIVERSAL, PATHFILE, GATES, RECIPROC – 7 free programs for individual settings in continuous rotation
Auto reverse rotation at preset torque limit
Torque range : 0.6 – 4.0 Ncm
Speed range: 250 – 1’200 rpm
Operates on a rechargeable battery and when connected to the mains
Battery autonomy: approx. 2 hours continuous use
Full recharge in approx. 5 hours

Direction to Uses : 

Before using the X-SMART Plus, read and understand all safety precautions outlined in the manual to ensure safe usage and prevent harm to yourself and others. Keep the manual for future reference and pass it on to any new owners.
When using the X-SMART Plus, always wear gloves and a rubber dam for protection.
Before changing the contra-angle or file, ensure that the power is turned off to prevent unintended rotation. Accidental touching of the ON/OFF key with the power on can be dangerous.
Clean the shank of the file before installation to prevent dirt from entering the chuck, which could lead to loss of concentricity and deterioration of chucking force.
Pay attention to the direction of the battery connector when installing batteries. Incorrect installation can cause damage and fluid leakage due to a short circuit.
Fully charge the rechargeable batteries before each use. Over time, fully charged batteries may discharge gradually even when not in use.
If the device stops automatically due to low battery voltage, it may not immediately indicate low voltage when powered on again. Recharge the battery as soon as possible.
Recharge the battery after it depletes as much as possible. Repeating short-time use and subsequent recharging may shorten its operating time due to the “memory effect.” Complete discharge and full charge cycles can help recover battery performance.
Return used Nickel Metal Hydride batteries to your distributor for proper recycling. Follow local laws and regulations regarding disposal of batteries.
When disposing of the control unit, follow the instructions provided by your local government for proper disposal as it may contain materials considered industrial waste.
Dispose of the contra-angle and motor handpiece as medical waste when discarding them.