SIDHDENT -12 LIT(ALUMINIUM)

Description

ALUMINIUM:

Life Dental & Clinical Autoclaves

An Unbeatable combination of Quality, Performance, and Value.

Life Clinical Autoclaves are sturdily constructed in rust-proof, heavy gauge Aluminum for use in rugged conditions.  It’s a unique vessel that generates steam under pressure and temperatures between 120°C to 125° Celsius.  On reaching the right temperature the instruments are subject to a saturated steam environment for a pre-specified time which results in safe and guaranteed sterilization.

Fratures:

All Aluminum deep-drawn Seamless construction.
Stylish, Light, Compact, Portable Easy to use top loading autoclaves.

Easily operate anywhere, anytime.

Equipped with Two stages “Over Pressure” protection system incorporating a calibrated continuous bleeding pressure Stopcock and Pressure release weight valve.

Extended life Sealing Gasket.

Equipped with 1hr. Rotary timer.

Customized designed Heating Element for better efficiency & longer life.

Color-coded Pressure Gauge shows an internal chamber condition during the cycle.

Equipped with Heat resistant handles and steam release/control valve.

For assurance of quality, each Autoclave is tested to the parameter of successful sterilization.

Specification : 

Model: Electric with Rotary Timer

Finish: Epoxy Powder coated

Vol. Capacity: 12 liters

Power supply: 220V.

Wattage: 1000W.

Drum Dimension: – 8” x 8”

Sterilization Pressure & Temperature:

Sterilizing Temperature: 121-degree Celsius. [Preset]

Operating Pressure: 15 psi.  [Preset]

 Accessories with Autoclave:

Outer MS Stand

Inner Tripod Stand

Dressing Drum

Power Cable

Direction to Uses : 

Place the autoclave on at the suitable place on the black steel stand and the sterilising material on the table or on the shelf.

Fill distilled or de-ionized water in the base chamber upto the level of tripod stand kept inside the base chamber.

Place the dressing drum loaded with sterilizing material int he autoclave and close the lid by pessing the lid down turning it clockwise until it turns anymore.

Close/tightened the both Steam release knob.

Connect the electric cord with the element socket. Plug to the mains (220/240V, 50Hz) and switch on the power.

Now rotate the timer knob to the desired time (40-50min.) required for sterilization. As the timer knob is rotated the heating starts.

After few minutes steam will start generating and pressure will starting rising on the pressure gauge.

At 15±1 psi pressure the excess steam will come out strongly from the stopcock to maintain this pressure througout the cycle.

The unit will automatically turn off when the prespecfied time has been reached.

Now to depressurize the unit , slowly loosen the the steam release knob and let the entire steam escape.

Wait for some time & make sure that there is no steam left in the autoclave and pressure guage reading is 0 psi.

Now open the autoclave lid and preserve the sterilized material for intended use.

clean and dry the autoclave after it’s use.

Periodic cleaning and maintainence of the autoclave is very important.